Pelco ES30TI manual Direction

DIRECTION

MAIN MENU	Other Menu			Az/El/Direction
<Camera>	Temp Units		Celsius	Set Azimuth Zero
<Power Up Mode>	Park time minutes		0	Az/El	Left
<Limit Stops>	Scan Speed deg/s		7	Az/El Line	10
<Other>	Pattern Length		1.5 min
				Direction	Right
<System Information>	Spd Profile	90 MPH Wind		Direction Line	10
<Factory Defaults>	<Zone Blank>			Zoom	Center
Exit	<Az/El/Direction>			Zoom Line	10
	Exit			Disp Duration	2

Exit

Direction programs the horizontal display position of the Direction label (N, NW, NE, …)

NOTES:

•For direction to be accurate, azimuth zero must be set to magnetic north.

•Direction display is not available when you are programming or running a pattern.

•Use different horizontal position and line settings for Az/El, Direction, and Zoom. Otherwise, the labels may overwrite one another.

The following settings are available for the Direction label:

•Off: Label is not displayed.

•Left: Label is displayed on the left-hand side of the screen.

•Center: Label is displayed in the center of the screen.

•Right: Label is displayed on the right-hand side of the screen.

The default is Right.

To program the horizontal label position for direction:

1.Program preset 95 (28). The main menu appears.

2.Position the cursor (>) beside <Other>. Press the Iris Open button; the menu appears.

3.Position the cursor (>) beside <Az/El/Direction>. Press the Iris Open button; the menu appears.

4.Position the cursor (>) beside Direction. Press the Iris Open button; the cursor moves to the right.

5.Move the joystick up or down to view the available selections.

6.Do one of the following:

•Select: Press the Iris Open button to select the option.

•Cancel: Press the Iris Close button to leave the setting as is.

C1307M-C (8/07) 25