AZIMUTH ZERO
MAIN MENU |
|
| Other Menu |
|
|
|
| Az/El/Direction |
| ||
<Camera> |
|
| Temp Units |
| Celsius |
|
|
|
| ||
|
|
|
| Set Azimuth Zero |
| ||||||
<Power Up Mode> |
|
| Park time minutes | 0 |
|
|
| Az/El | Left | ||
<Limit Stops> |
|
| Scan Speed deg/s | 7 |
|
|
| Az/El Line | 10 | ||
<Other> |
|
|
| Pattern Length |
| 1.5 min |
|
| Direction | Right | |
<System Information> |
|
| Spd Profile | 90 MPH Wind |
|
| Direction Line | 10 | |||
<Factory Defaults> |
|
| <Zone Blank> |
|
|
|
|
| Zoom | Center | |
Exit |
|
| <Az/El/Direction> |
|
|
|
| Zoom Line | 10 | ||
|
|
|
|
|
|
| |||||
|
|
|
| Exit |
|
|
|
|
| Disp Duration | 2 |
Exit
Azimuth is the pan angle from 0 to 359 degrees. Azimuth zero is the programmed
To set azimuth zero:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside <Other>. Press the Iris Open button; the menu appears.
3.Position the cursor (>) beside <Az/El/Direction>. Press the Iris Open button; the menu appears.
4.Position the cursor (>) beside Set Azimuth Zero. Press the Iris Open button. The Set Azimuth Zero programming menu appears on the monitor.
5.Use the joystick to pan the Esprit unit to the desired azimuth zero (0° point) position.
6.Press the Iris Open button to set the azimuth zero position.
23 |
