7.Set Connection type to Static.

 

EchoLife HG612 FTTC VDSL NTE

3 Getting Started

User Guide

4.Click Submit.

Step 2 Set WAN parameters.

1.In the navigation tree, choose Basic > WAN.

2.Select a PVC from the Layer2 interface drop-down list box.

Note

The name of this PVC should begin with ptm.

3.Select Enable for WAN connection.

4.Select a service from the Service list drop-down list box.

5.Set Port binding to LAN1 or LAN2.

6.Select Route from the Connection mode drop-down list box.

7.Set Connection type to Static.

8.Select Enable for WAN802.1q, WAN802.1p, LAN802.1q, LAN802.1p, or NAT as required.

9.Set the IP address and subnet mask of the WAN connection.

10.Click Submit.

Step 3 Set LAN parameters.

1.In the navigation tree, choose Basic > LAN.

2.Set the IP address and subnet mask of the LAN connection.

3.Select Enable for DHCP server, and then set the corresponding parameters.

4.Click Submit.

3.5.3Configuring the PTM Route–PPPoE

Step 1 Set PTM parameters.

1.In the navigation tree, choose Basic > PTM.

2.Set DSL latency to Path0 or Path1.

3.Set PTM priority to Normal Priority or High Priority.

4.Click Submit.

Step 2 Set WAN parameters.

1.In the navigation tree, choose Basic > WAN.

2.Select a PVC from the Layer2 interface drop-down list box.

Note

The name of this PVC should begin with ptm.

3.Select Enable for WAN connection.

4.Select a service from the Service list drop-down list box.

5.Set Port binding to LAN1 or LAN2.

6.Select Route from the Connection mode drop-down list box.

7.Set Connection type to PPPoE.

8.Select Enable for WAN802.1q, WAN802.1p, LAN802.1q, LAN802.1p, or NAT as required.

9.Enter the user name and password provided by the ISP.

3-8

Huawei Proprietary and Confidential

Issue 01 (2009-05-15)

Copyright © Huawei Technologies Co., Ltd

 

 

Page 26
Image 26
Huawei HG612FTTC VDSL NTE Configuring the PTM Route-PPPoE, Select Enable for WAN connection, Set Connection type to Static