
EchoLife HG612 FTTC VDSL NTE |
|
User Guide | 3 Getting Started |
Step 3 Set LAN parameters.
1.In the navigation tree, choose Basic > LAN.
2.Set the IP address and subnet mask of the LAN connection.
3.Click Submit.
3.5PTM Mode Configuration
3.5.1 Configuring the PTM Route–DHCP
Step 1 Set PTM parameters.
1.In the navigation tree, choose Basic > PTM.
2.Set DSL latency to Path0 or Path1.
3.Set PTM priority to Normal Priority or High Priority.
4.Click Submit.
Step 2 Set WAN parameters.
1.In the navigation tree, choose Basic > WAN.
2.Select a PVC from the Layer2 interface
Note
The name of this PVC should begin with ptm.
3.Select Enable for WAN connection.
4.Select a service from the Service list
5.Set Port binding to LAN1 or LAN2.
6.Select Route from the Connection mode
7.Set Connection type to DHCP.
8.Select Enable for WAN802.1q, WAN802.1p, LAN802.1q, LAN802.1p, or NAT as required.
9.Click Submit.
Step 3 Set LAN parameters.
1.In the navigation tree, choose Basic > LAN.
2.Set the IP address and subnet mask of the HG612.
3.Select Enable for DHCP server, and then set the corresponding parameters.
4.Click Submit.
Note
PTM = pulse time modulation
3.5.2 Configuring the PTM Route–Static
Step 1 Set PTM parameters.
1.In the navigation tree, choose Basic > PTM.
2.Set DSL latency to Path0 or Path1.
3.Set PTM priority to Normal Priority or High Priority.
Issue 01 | Huawei Proprietary and Confidential | ||
Copyright © Huawei Technologies Co., Ltd | |||
|
|