Huawei HG612FTTC VDSL NTE manual Configuring the PTM Bridge, Set DSL latency to Path0 or Path1

EchoLife HG612 FTTC VDSL NTE
User Guide	3 Getting Started

10.Select Enable for DHCP spoofing as required.

11.Select the authentication mode provided by the ISP.

12.Select a dialing method, and then click Submit. Step 3 Set LAN parameters.

1.In the navigation tree, choose Basic > LAN.

2.Set the IP address and subnet mask of the LAN connection.

3.Select Enable for DHCP server, and then set the corresponding parameters.

4.Click Submit.

3.5.4Configuring the PTM Bridge

Step 1 Set PTM parameters.

1. In the navigation tree, choose Basic > PTM.

2. Set DSL latency to Path0 or Path1.

3. Set PTM priority to Normal Priority or High Priority.

4. Click Submit. Step 2 Set WAN parameters.

1.In the navigation tree, choose Basic > WAN.

2.Select a PVC from the Layer2 interface drop-down list box.

Note

The name of this PVC should begin with ptm.

3.Select Enable for WAN connection.

4.Select a service from the Service list drop-down list box.

5.Set Port binding to LAN1 or LAN2.

6.Select Bridge from the Connection mode drop-down list box.

7.Select PPPoE_ Bridged or IP_ Bridged from the Bridge type drop-down list box.

8.Select Enable for DHCP transparent transmission, WAN802.1q, WAN802.1p, LAN802.1q, or LAN802.1p as required.

9.Click Submit.

Step 3 Set LAN parameters.

1.In the navigation tree, choose Basic > LAN.

2.Set the IP address and subnet mask of the LAN connection.

3.Click Submit.

Issue 01 (2009-05-15)	Huawei Proprietary and Confidential	3-9
	Copyright © Huawei Technologies Co., Ltd