Datamax ST-3210, SV-3306 manual AC Voltage Configuration, AC Selection Switch Required Fuse Rating

Setting up the Printer

This section details the connections, loading methods, memory module installation, and resident ticket formats of the printer.

3.0AC Voltage Configuration

Depending upon the configuration of the AC Selection Switch and fuse, the printer is capable of either 115 or 230 VAC single-phase operation.

Before connecting power, check the voltage configuration: (1) locate the AC Selection Switch and Fuse Holder (containing the fuse) on the Back Panel, then (2) referencing the table below, ensure that the AC Selection Switch setting and fuse rating correspond to your AC Source Voltage.

Failure to verify the AC Selection Switch setting and fuse rating can result in personal injury and/or printer damage.

CAUTION

AC Source Voltage	AC Selection Switch	Required Fuse Rating
105 – 125 VAC	115 VAC	1.6 amp / 250V slow-blow
210 – 250 VAC	230 VAC	0.8 amp / 250V slow-blow

ST/SV-3210 and ST/SV-3306 7