Datamax ST-3210, SV-3306, ST-3306, SV-3210 manual Specifications

Specifications

6.0Specifications

Communications

Character Set:	ANSI ASCII
Parallel Interface Port:	Centronicsâ type 36-pin
Serial Interface Port:	RS-232c and RS-422; DB25
Baud Rates:	600, 1200, 2400, 4800, 9600, 19.2K and 38.4K
Word Length and Parity:	Selectable data format:
	7-bit word with even parity, or
	8-bit word with no parity
Handshaking:	Xon/Xoff and CTS & DTR.
Input Buffer:	Serial: Approximately 6 Kbytes. XOFF is
	transmitted and DTR goes low with 750 bytes
	available in the buffer. XON is transmitted and
	DTR goes high when 1000 bytes remain in the
	buffer. Characters are transmitted without
	parity from the printer.
	Parallel: 1KBytes.

Control (Front) Panel

Indicators:	Power, Fault and On-Line.
Buttons:	Dual Purpose: Pause/F1; Feed/F2; and Test/F3
Potentiometer:	0-20 darkness settings

Electrical

Input Voltage, Configurable:

Circuit Protection:

Grounding:

105 − 125 VAC, or

210 − 250 VAC; 47-63 Hz.

115 VAC: 1.6A Time Delay Fuse.

230 VAC: 0.8A Time Delay Fuse.

Unit must be connected to a properly grounded receptacle.

ST/SV-3210 and ST/SV-3306 43