Datamax ST-3210, SV-3306, ST-3306 Maintenance, Recommended Cleaning Schedule Area Method Interval

4.4Maintenance

Routine maintenance will ensure the optimum performance of the printer. The following table outlines the recommended cleaning intervals, while the items listed below will help do the job safely and effectively:

∙ Isopropyl alcohol	∙ Soft-bristle brush
∙ Cotton swabs	∙ Soapy water/mild detergent
∙ A clean, lint-free cloth	∙ Compressed air

For your continued safety and to avoid damage to the unit, always turn ‘Off’ and unplug the printer before servicing.

Isopropyl alcohol is a flammable liquid, always take the CAUTION proper precautions when using this solvent.

Recommended Cleaning Schedule

Area	Method	Interval
Printhead	A cotton swab dampened with isopropyl alcohol,	After each
	wiped across the printhead until all build-up is	roll or box
	removed. See Section 4.4.1.	of tickets.
Platen	A cotton swab dampened with isopropyl alcohol	After each
Roller	wiped across the platen roller. Rotate the roller by	roll or box
	hand and repeat to clean entire surface. See	of tickets.
	Section 4.4.2.
TOF Sensor	A brush or compressed air (and isopropyl alcohol,	Monthly
	if necessary) to remove all dust build-up. See	or as
	Section 4.4.3.	needed.
Ticket Detect	Compressed air to remove all dust build-up. See	As needed.
Sensor	Section 4.4.4.
Ticket Path	A brush or compressed air to remove all build-up	As needed.
	along the paper path.
Interior	A brush or compressed air to remove all build-up	As needed.
(ST Models	in the ticket compartment. See Section 4.4.5.
only)
Exterior	A soft cloth dampened with a mild detergent to	As needed.
	remove all build-up. See Section 4.4.6.
Cutter	A brush or compressed air to remove all build-up.	As needed.
(optional
equipment)

ST/SV-3210 and ST/SV-3306 31