3.2.2SV Models
ŒPlug in and turn ‘On’ the printer.
•Place fanfold ticket stock in the bottom of the enclosure, bring the stock up to the Media Guides. (The TOF Mark should be facing away from the Printhead Latch; see Section 4.) Ensure that the Printhead Latch is locked.
ŽLoosen the Thumbscrew and adjust the Media Guides to fit the width of the ticket stock as described in Step 5 of Section 3.2.1.
•Slide the ticket stock through the Media Guides. The motor will start; continue feeding the tickets. The printer will grab the leading edge of the stock and complete the positioning process. If this process fails, see the note below.
þNotes: If automatic loading fails to occur, see the note at the end of Section 3.2.1.
If the ticket did not feed to a proper position, the TOF Sensor may need adjustment; see Section 4 for details.
12 |
|
