The table below lists the default settings, according to the printer model, for each Stock ID number.
Stock ID Default Settings
| Stock ID | Print Width | Start of Print | Cut/Tear |
| |
| 3210 Models | 3306 Models | Position | Position* |
| |
|
|
| ||||
| 0 | 3.15" (80.0 mm) | 3.20" (81.3 mm) | .07" (1.8 mm) | .05" (1.3 mm) |
|
1 | 3.15" (80.0 mm) | 3.20" (81.3 mm) | 4.28" (108.7 mm) | 4.26" (108.2 mm) | ||
2 | 3.15" (80.0 mm) | 3.20" (81.3 mm) | 1.67" (42.4 mm) | 1.65" (41.9 mm) | ||
3 | 3.15" (80.0 mm) | 3.20" (81.3 mm) | .02" (.5 mm) | 0 |
| |
4 | 1.89" (48.0 mm) | 1.81" (46.0 mm) | .02" (.5 mm) | 0 |
| |
5 | 1.89" (48.0 mm) | 1.92" (48.8 mm) | 4.33" (110.0 mm) | 4.30" (109.2 mm) | ||
6 | 1.89" (48.0 mm) | 1.92" (48.8 mm) | 1.70" (43.2 mm) | 1.67" (42.4 mm) | ||
7 | 1.89" (48.0 mm) | 1.92" (48.8 mm) | 1.45" (36.8 mm) | 1.42" (36.1 mm) | ||
8 | 2.20" (55.9 mm) | 2.24" (56.9 mm) | .07" (1.8 mm) | .05" (1.3 mm) | ||
9 | 3.15" (80.0 mm) | 3.20" (81.3 mm) | 0 | 0 |
|
*For SV Model printers using the Tear Bar: Add .07 inch (1.8mm) to these distances for Top Plate clearance of the ticket.
| 25 |