4.4.5Interior Cleaning
ST Models only: Ticket Compartment Cleaning
During normal operation, paper particles from the ticket stock accumulate inside the printer. These particles can stick to the ticket and cause voids in the print, reducing print quality. To clean the interior of the printer:
Œ Turn ‘Off’ and unplug the printer.
• Raise the access cover; see Section 3.2.
Ž Slide the printhead latch to the unlocked position,
raise the Printhead Assembly (see Section 4.4.1) and remove the ticket stock.
•Using a soft brush or compressed air, remove all debris accumulated inside the ticket compartment.
•Plug in and turn ‘On’ the printer.
‘Load ticket stock (see Section 3.2).
’Close the access cover.
4.4.6Exterior Surface Cleaning
The exterior surface can be cleaned using a general purpose cleaner and a soft cloth or sponge. Never use abrasive cleansers or solvents. To clean:
ŒTurn ‘Off’ and unplug the printer.
•Gently wipe the exterior surfaces until clean and then allow time to dry.
ŽPlug in and turn ‘On’ the printer.
36 |
|
