Datamax ST-3210, SV-3306, ST-3306, SV-3210 manual Operational Database Modification

4.3Operational Database Modification

The operational database for the printer, which contains the parser mode setting and other important printer parameters, can be changed using the front panel. To change the Operational Database settings:

ŒIf on-line, press the PAUSE button to place the printer off-line.

•Press and hold the F2 button until the On-Line Indicator is lit (approximately six seconds) then release. To adjust:

ØPress the F1 button to advance to the next setting of the current item, print the selection, and present it for acceptance.

ØPress the F2 button to accept the presented item and value for use then print and present the next item, or press and hold the F2 button (until the On-Line Indicator is lit) to cause a Warm Reset, apply the new settings, and place the printer on-line.

ØPress the F3 button to return to the previous setting for the current item, print the selection, and present it for acceptance.

The following pages contain tables listing the settings and values that are accessible and modifiable through this method, while next subsection is included to provide a systematic example of the database modification procedure.

ST/SV-3210 and ST/SV-3306 27