4.3.1Database Modification Example
This section details the modification of an Operational Database parameter. The following example increases the printing speed parameter from 6 to 8 IPS on the
ŒIf
•Press and hold the F2 button until the
The printer will turn off the On-Line Indicator and print:
STOCK ID | = | 5 |
ŽPress the F2 button three times (allow time for printing following each button press), to arrive at the Print Speed parameter.
The printer will print: | PRINT SPEED | = | 6 | IPS |
|
| PARSER MODE | = | DTPL |
|
|
| TICKET WIDTH = | 189 | (48 | MM) | |
| STOCK ID | = | 5 |
|
|
•Press the F1 button two times (again, allow time for printing following each button press), to arrive at the 8 IPS setting.
The printer will print: | PRINT SPEED | = | 8 | IPS |
|
| PRINT SPEED | = | 7 | IPS |
|
| PRINT SPEED | = | 6 | IPS |
|
| PARSER MODE | = | DTPL |
|
|
| TICKET WIDTH = | 189 | (48 | MM) | |
| STOCK ID | = | 5 |
|
|
•To save the changes and exit the mode, press and hold the F2 button until the
The parameter changes can be confirmed by printing a Configuration Ticket; see Section 3.5.1.
30 |
|
