Moxa Technologies EDS-508 Configuring Relay Warning, Mail Server IP/Name, Email Address

EDS-508 Series User’s ManualFeatured Functions

Mail Server IP/Name

	Setting	Description	Factory Default
	IP address	The IP Address of your email server.	None
Account Name
	Setting	Description	Factory Default
	Max. 45 Charters	Your email account.	None
Password Setting
	Setting	Description	Factory Default
	Disable/Enable to	To reset the Password from the Web
	change Password	Browser interface, check-mark the Change
		password check-box, type the Old	Disable
		Password, type the New Password, retype
		the New password, and then click on
		Activate.
	Old Password	Type current password when enabled to	None
		change password; Max. 45 Characters.
	New Password	Type new password when enabled to	None
		change password.
	Retype Password	If you type a new password in the
		Password field, you will be required to
		retype the password in the Retype new	None
		password field before updating the new
		password.
Email Address
	Setting	Description	Factory Default
	Max. 30	You can set up to 4 email addresses to	None
	Characters	receive alarm emails from EDS.

Send Test Email

After finishing with the email settings, you should first press the “Activate” button to activate those settings, then press the “Send Test Email” button to verify that the settings are correct.

NOTE	Auto warning e-mail messages will be sent through an authentication protected SMTP server
	that supports the CRAM-MD5, LOGIN, and PAIN methods of SASL (Simple Authentication
	and Security Layer) authentication mechanism.
	We strongly recommend not entering your Account Name and Account Password if auto
	warning e-mail messages can be delivered without authentication mechanism.

Configuring Relay Warning

The Auto Relay Warning function uses relay output to alert the user when certain user-configured events take place. There are three basic steps required to set up the Relay Warning function:

1.Configuring Relay Event Types

Select the desired Event types from the Console or Web Browser Event type page. (A description of each event type is given later in the Relay Alarm Events setting subsection.)

3-50