Moxa Technologies EDS-508 user manual Using Set Device IP, Configuring Line-Swap Fast Recovery

EDS-508 Series User’s Manual Featured Functions

Configuring Line-Swap Fast Recovery

Enable Line-Swap-Fast-Recovery

Setting	Description	Factory Default
Enable/Disable	Check-mark the check box to enable	Enable
	the Line-Swap-Fast-Recovery function

Using Set Device IP

To reduce the effort required to repeatedly set up IP addresses, the EDS-508 series comes equipped with DHCP/BootP server and RARP protocol to automatically set up IP addresses of Ethernet-enabled devices.

When enabled, the Set device IP function allows MOXA EtherDevice Switch to automatically assign specific IP addresses to connected devices that are equipped with DHCP Client or RARP protocol. In effect, MOXA EtherDevice Switch acts as a DHCP server by assigning a connected device with a specific IP address stored in MOXA EtherDevice Switch’s internal memory. Each time the connected device is switched on or rebooted, MOXA EtherDevice Switch sends the device the desired IP address.

Take the following steps to use the Set device IP function:

3-53