Lantronix 2100E Connection Settings - TCP

4: Web Manager Configuration
WiBox® 2100E Device Server User Guide 35
At Time of Disconnect Select Yes to clear the input buffer when the network connection to or
from the device is disconnected. The default setting is No.
Flush Output Buffer (Network to Serial)
With Active Connect Select Yes to clear the output buffer with a connection that is initiated
from the device to the network. The default setting is No.
With Passive Connect Select Yes to clear the output buffer with a connection initiated from the
network to the device. The default setting is No.
At Time of Disconnect Select Yes to clear the output buffer when the network connection to or
from the device is disconnected. The default setting is No.
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
Connection Settings - TCP
To configure a channel’s TCP settings:
1. From the main menu, click Connection for either Channel 1 or Channel 2 to display the
Connection Settings page for the selected channel.
2. In the available fields, enter the following information:
Note: See Connection Settings - UDP for UDP connections.
Connect Protocol
Protocol Select TCP from the pull-down menu.