Lantronix 2100E manual Connect Mode Active Connection, Endpoint Configuration, Common Options

		4: Web Manager Configuration
Connect Mode: Active Connection
	Active Connect	Select None (default) to disable Active Connect. Otherwise, indicate
		the connection type from the drop-down list:
		 With Any Character: Attempts to connect when any character is
		received from the serial port.
		 With Active Mdm Ctrl In: Accepts external connection requests
		only when the Modem Control In input is asserted.
		 With Start Character: Attempts to connect when it receives a
		specific start character from the serial port. The default start
		character is carriage return.
		 Manual Connection: Attempts to connect when directed by a
		command string received from the serial port.
		 Auto Start: Automatically connects to the remote IP address and
		port after booting up.
	Start Character	If Active Connect is set to With Start Character, enter the start
		character in this field. The default setting is 0D.
	Modem Mode	Indicates the on-screen response type when in Modem Mode (if
		Modem Mode is enabled). The default setting is None.
	Show IP Address After	Indicates whether to display the remote IP address upon connection.
	Ring	The default setting is Yes.
Endpoint Configuration
	Local Port
		Enter the local port number.
	Auto increment for	Check the checkbox to auto-increment the local port number for new
	active connect	outgoing connections. The range of auto-incremented port numbers is
		50,000 to 59,999 and loops back to the beginning when the maximum
		range is reached. Disabled by default.
	Remote Port	Enter the remote port number.
	Remote Host	Enter the IP address of the remote device.
Common Options
	Telnet Com Port Cntrl	Available for configuration only when Active Connect is set to None.
		Select Enable to permit Telnet communication to the WiBox 2100E
		unit. The Telnet Com Port Cntrl feature is used in conjunction with the
		Com Port Redirector (CPR) utility. (See the CPR online Help for
		details.)
	Connect Response	A single character is transmitted to the serial port when there is a
		change in connection state. Default setting is None.
	Terminal Name	Available for configuration only when Telnet Com Port Cntrl is set to
		Enable.
		Use the terminal name for the Telnet terminal type. Enter only one
		name. When this option is enabled, the unit also reacts to the end of
		record (EOR) and binary options, which can be used for applications
		such as terminal emulation to IBM hosts.
	Use Hostlist	If this option is set to Yes, the device server scrolls through the host list
		until it connects to a device listed in the host list table. Once it

WiBox® 2100E Device Server User Guide 37