Lantronix 2100E manual Installing DeviceInstaller, 802.11i/WPA2-Personal

3: Getting Started

802.11i/WPA2-Personal :

Security suite: 0=none, 1=WEP, 2=WPA, 3=WPA2/802.11i (0) ? 3

Change key (N) ? Y

Display key (N) ?

Key type 0=hex, 1=passphrase (1) ?

Enter key: ***********************

Encryption: 0=CCMP, 1=CCMP+TKIP, 2=CCMP+WEP, 3=TKIP, 4=TKIP+WEP (3) ?

Property	Description
Change key	Select (Y) Yes to modify the currently configured key.
Display key	Select (Y) Yes to show the currently configured key/passphrase.
Key type	Indicate whether the new key is in hexadecimal or passphrase format.
Enter key	Enter the passphrase. The maximum length is 63 characters. Lantronix
	recommends using a passphrase of 20 characters or more for maximum
	security.
Encryption	Set the type to the minimum required security level. The “+” sign indicates that
	the group (broadcast) encryption method is different from the pairwise (unicast)
	encryption. For example, for CCMP+TKIP, CCMP is the pairwise encryption
	and TKIP is the group encryption. CCMP is the default for WPA2.

Minimum TX Data Rate: Selects the minimum data rate the device will use when auto- fallback is enabled. The default is 1 Mbps (menu option 7).

Max TX Fails: Determines the maximum number of consecutive transmit packet failures before the device will drop its association with the AP and attempt to establish a new one. The range of attempts is 6 to 64 with 255 equaling disabled. The default is 6 failed attempts.

3.Upon completing the IP and WLAN settings, select menu option 9 to save and exit the WiBox 2100E Setup Mode.

4.To further configure the WiBox 2100E, continue to 4: Web Manager Configuration or

5: Telnet or Serial Port (Setup Mode) Configuration.

Installing DeviceInstaller

Use DeviceInstaller utility to configure the IP address and other network parameters when a wireless connection is established between the WiBox and a laptop or desktop equipped with a wireless card.

Note: You will need a Windows PC running Lantronix DeviceInstaller 4.2 or higher.

1.Download the latest version of DeviceInstaller from www.lantronix.com/downloads.

2.Run the executable to start the installation process.

3.Respond to the installation wizard prompts. (If prompted to select an installation type, select Typical.)

Note: For more information about DeviceInstaller, see the DeviceInstaller Online Help.

WiBox® 2100E Device Server User Guide 23