Lantronix 2100E manual Flow Control Option Hex, Port Numbers Reserved for

7: Setup Mode: Channel Configuration

Flow

Flow control sets the local handshaking method for stopping serial input/output. The default setting is 00.

Flow (00) ? _

Use the following table to select flow control options:

Table 7-3. Flow Control Options

Flow Control Option	Hex
No flow control	00
XON/XOFF flow control	01
Hardware handshake with RTS/CTS lines	02
XON/XOFF pass characters to host	05

Port Number

The setting represents the source port number in TCP connections. It is the number that identifies the channel for remote initiating connections.

Port No (10001) ? _

The default setting for Port 1 is 10001. The range is 1-65535, except for the following reserved port numbers:

	Table 7-4. Reserved Port Numbers
Port Numbers		Reserved for
1 – 1024		Reserved (well known ports)
9999		Telnet setup
14000-14009		Reserved for Redirector
30704		Reserved (77F0h)
30718		Reserved (77FEh)

Warning: We recommend that you not use the reserved port numbers for this setting as incorrect operation may result.

Use Port 0 for the outgoing local port to change with each connection. The port range is 50,000 to 59,999. Each subsequent connection increments the number by 1 (it wraps back around to 50,000).

Only use this automatic port increment feature to initiate a connection using TCP. Set the port to a non-zero value when the unit is in a passive mode or when using UDP instead of TCP.

WiBox® 2100E Device Server User Guide 51