Omron NT31 NT31C manual Operations in the System Installer Mode, Memory Switch Status, Off, Esc/P

Operations in the System Installer Mode		Section 6-5
	After initialization, the memory switch statuses are as follows.
	Memory Switch	Status
	Start-up Wait Time	00
	Key Press Sound	ON
	Buzzer Sound	OFF
	Printer Controller	ESC/P
	Print Method	Tone (NT31C only)
	Screen Saver Movement	Display erased
	Screen Saver Start up Time	010
	Hist. Disp. Method	From New Data
	Resume Function	OFF
	Comm. Auto-return	OFF
	Time-out Interval	01
	Retry Counts	005
	Comm. A Method	Host Link (communications speed = 9600 bps)*
	Comm. B Select	RS-232C
	Comm. B Method	None

*The communication conditions for a bar code reader are initialized as follows: Data bits: 7 bits; stop bit: 1 bit; parity: none; flow control: RS/CS.

6-5 Operations in the System Installer Mode

The following functions can be executed in the System Installer mode:

•Setting the display language (see below)

•Clearing/installing the system program (page 151)

•Disabling/enabling display of the System Menu (changing the system settings) (page 153)

•Disabling/enabling writing to the screen data memory (changing the system settings) (page 153)

•Clearing screen data (page 154)

For details on calling the System Installer mode, refer to Calling the System In- staller Mode (page 138).

150