Omron NT31 NT31C manual Setting methods for each unit are as follows, Host Model

Connecting to the RS-232C Port at the Host Section 4-1

Settings at The Host

The setting methods for each unit are as follows:

Connecting to a C-series C200HS, C200HX/HG/HE(-Z)E, CPM1, CPM2A,

CPM2C, CQM1, CQM1H, or SRM1

PC Setup Area Settings

Write the PC Setup area (data memory) settings directly from a Programming Device (e.g. SYSMAC support software) in accordance with the host model and port.

Host Model	Word #	Writing Value	Setting
RS-232C port of C200HS,
C200HX/HG/HE(-Z)E, CPM2A,	DM6645
CPM2C, CQM1, CQM1H, SRM1
Port A of C200HX/HG/HE(-Z)E (*1)	DM6555	4000	Use NT link
Port 1 of CQM1H (*2)			(1:1)
Port B of C200HX/HG/HE(-Z)E (*1)	DM6550
CPM1	DM6650

*1 RS-232C port of the Communication Board

*2 RS-232C port of the Serial Communications Board

For details on operations relating to the PC Setup area, refer to the manual for the PC which is used.

Connecting to a CPM2C

The CPM2C PCs do not have the same kind of port connectors found on CS1-series PCs. The CPM2C’s communication port handles both RS-232C and peripheral port connections which are divided internally. Therefore, when using the CPM2C, it is necessary to select RS-232C or peripheral port connections, according to the kind of cable and port (on the cable) used, as shown in the fol- lowing table. Refer to the CPM2C Operation Manual for more details.

Port connecting to PT	PC Setup
RS-232C port (D-Sub 9-pin) of CPM2C-CN111	Built-in RS-232C port settings
Peripheral port of CPM2C-CN111	Peripheral port settings
RS-232C port (D-Sub 9-pin) of CS1W-CN118	Built-in RS-232C port settings
Peripheral port of CS1W-CN114	Peripheral port settings

Peripheral port
CPM2C-CN111 CPM2C	CS1W-CN118 CPM2C	CS1W-CN114 CPM2C
RS-232C port	RS-232C port	Peripheral port
	(D-Sub 9-pin, female)
(D-Sub 9-pin, female)

Setting the DIP Switches on the Front of a C200HX/HG/HE(-Z)E, CQM1,

CQM1H

When using a C200HX/HG/HE(-Z)E, CQM1, or CQM1H, the DIP switches on

69