Omron NT31 NT31C manual Before Operating, Device or Software Manual Title Number

Before Operating Section 1-6

1-6 Before Operating

Follow the procedure given below to start the system of the NT31/NT31C.

Host

NT31/NT31C

Support Tool

Set the host settings.

• For the host link, refer to

pages 54 and 101, and

the manuals for the host

link unit and peripheral

tools.

• For the NT link (1:1), refer

to pages 67 and 111.

• For the NT link (1:N), re-

fer to pages 72 and 113.

• For the high-speed NT

Install the PT in the operation panel.

(page 32)

Connect the power supply.

(page 33)

Install the system program.*1

(refer to page 151 and the Support Tool manual)

Install the Support Tool at the computer.

(refer to the manual for the Support Tool)

link (1:N), refer to pages

75 and 115.

• For the Memory link, refer

to pages 72 and 116

Connect to the

NT31/NT31C.

Create the host program.

Make the settings in the			Create the screens.
system installer mode.*2			(Refer to the NT31/NT31C/NT631/NT631C
	(page 151)		Programmable Terminal Reference Manual
			and the Support Tool Operation Manual.)
				(page 155)
		Transmit the screen data.

Set the memory switches.

(page 157)

Connect to the host.

When RS-232C used at the PT: refer to section 4

When RS-422A/485 used at the PT: refer to section 5

Confirm the settings and check communication.

Start operation.

*1: System program installation is only done in special circumstances, for example when changing the system program, or to recover the original status of the installed program. This operation is not normally necessary. When using other PC models (sequencers), however, it is necessary to install specific system programs.

*2: Display of the system menu, and all change operations, can be inhibited. This

enables you to prevent the accidental deletion or alteration of screens and settings.

Reference: S For the system program, use the NT31/NT31C system program supplied as an accessory with the NT-series Support Tool (NT-ZJCAT1-EV4).

SFor the Support Tool, use NT-series Support Tool for Windows (Ver. 4.1). Refer to the following manuals for the devices and software.

Device or Software	Manual Title	Manual
		Number
NT31/NT31C,	Reference Manual	V064-E1-1
NT631/NT631C
System Installer	NT-series Support Tool for Windows (Ver. 4.1) Operation Manual	V061-E1-j
Support Tool	NT-series Support Tool for Windows (Ver. 4.1) Operation Manual	V061-E1-j

22