Omron NT31 NT31C manual 173

System Settings Section 6-9

•PC-PR201H:

Printers that can emulate the PC-PR201H, made by NEC Corp.

•PCL 5:

Printers that conform to the PCL 5 printer control specifications.

Note that the NT31 can only be used with the monochrome Tone setting and does not support color printing.

For the NT31, the Print Method is fixed as Tone.

The default (factory) setting is ESC/P.

Reference: S In addition to this setting, NT31C has the Print Method setting (page 174).

SFor details on the print function, refer to 2-15-7 Print Function in the Reference Manual.

Set the printer controller setting by following the menu operation from the Sys- tem Menu shown below.

Ver 3.10

Select Maintenance Mode.

Select Memory Switch.

Press Printer Controller to display the re- quired printer type.

The setting option changes each time the touch switch is pressed.

To set other memory switches, select the relevant screen using the [] (next screen) or [] (previous screen) touch switch, then make the setting.

•To confirm the settings and quit the memory switch setting screen, press the Quit touch switch. The settings made last will be set and the NT31/NT31C will return to the MAINTENANCE MODE MENU screen.

•To quit the memory switch setting screen without confirming the settings, press the Abort touch switch. The NT31/NT31C will return to the MAINTENANCE MODE MENU screen with the previous settings still in effect.

173