Omron NT31 NT31C manual Adapter, or a CPM1-CIF11 RS-422A Adapter

	Device Monitor Function	Section 6-13
		CN111 or CS1W-CN114/118 Connecting Cable, a CPM1-CIF01 RS-232C
		Adapter, or a CPM1-CIF11 RS-422A Adapter.
		Refer to Section 4 Connecting to the Host from the RS-232C Port or Section 5
		Connecting to the Host from the RS-422A/485 Port for details on connecting to
		the PC.
CS1G/CS1H		The 1:N NT Link (standard or high-speed) can be used. The connection method
		is exactly the same as for the 1:N NT Link.
		Refer to Section 4 Connecting to the Host from the RS-232C Port or Section 5
		Connecting to the Host from the RS-422A/485 Port for details on connecting to
		the PC.

6-13-3 Method of Use

The Device Monitor screen is displayed by operating the system menu as de- scribed below.

Ver 3.10

Select Expansion Mode.

Select Device Monitor.

An error message will be displayed if the wrong communications proto- col is selected.

The Device Monitor screen is displayed.

Reference: When an error screen is displayed, press the Check touch switch on the screen to return to the system menu. In addition, pressing two of the four corners of the touch panel simultaneously in the error screen enables the display of the system menu.

For more details on operations of the Device Monitor function, refer to 2-16 De- vice Monitor Function in the Reference Manual.

229