Omron NT31 NT31C manual Setting the Print Method NT31C Only

System Settings Section 6-9

6-9-6 Setting the Print Method (NT31C Only)

The NT31/NT31C has a function for printing out data at a printer connected to it in response to an instruction from the host or operation at the NT31/NT31C.

When using the NT31C, the currently displayed screen image or other data can be printed out in color. You can select whether screen data is actually printed out in color, or in monochrome tones that represent colors, with this memory switch setting.

When PCL 5 is set for Printer Controller, the setting is fixed as Tone.

•Color: Color images are printed in color.

•Tone: Color images are printed in monochrome tones. The default (factory) setting is Tone.

Reference: S In addition to this setting, NT31C has the Printer Controller setting (page 172).

SFor details on the print function, refer to 2-15-7 Print Function in the Reference Manual.

Set the print method setting by following the menu operation from the System

Menu shown below.

Ver 3.10 Select Maintenance Mode.

Select Memory Switch.

Press Print Method to display the required printing method.

The setting option changes each time the touch switch is pressed.

To set other memory switches, select the relevant screen using the [] (next screen) or [] (previous screen) touch switch, then make the setting.

•To confirm the settings and quit the memory switch setting screen, press the Quit touch switch. The settings made last will be set and the NT31/NT31C will return to the MAINTENANCE MODE MENU screen.

174