Omron NT31 NT31C manual Recommended Connectors, Cables, and Crimp Terminals

Connecting to the Host’s RS-232C Port Section 5-1

CS1H-CPU67-E(V1)

CQM1H-CPU51CQM1H-CPU61

C200HE-CPU32-(Z)E C200HE-CPU42-(Z)E

C200HG-CPU33-(Z)E C200HG-CPU43-(Z)E

C200HG-CPU53-(Z)E C200HG-CPU63-(Z)E

C200HX-CPU34-(Z)E C200HX-CPU44-(Z)E

C200HX-CPU54-(Z)E C200HX-CPU64-(Z)E

C200HX-CPU65-ZE C200HX-CPU85-ZE

Usable Cables with Attached Connectors:

•For host link, 1:1 NT Link, or 1:N NT Link (+5 V power supplied from PC)

XW2Z-070T-1 (9-pin to 9-pin, 0.7 m)

XW2Z-200T-1 (9-pin to 9-pin, 2 m)

SJ46006-102 (9-pin to 9-pin, 1 m)

SSJ46006-202 (9-pin to 9-pin, 2 m)

1	6	NT-AL001 side					PC side
			Abbreviation	Pin number	Shielding wire	Pin number Abbreviation
				Connector		Connector
			FG				FG
				hood		hood
			−	1		1	−
		RS-232C	SD	2		2	SD	RS-232C
		connector	RD	3		3	RD	connector
			RS	4		4	RS
			CS	5		5	CS
			+5V	6		6	+5V
			−	7		7	−
			−	8		8	−
			SG	9		9	SG
5	9		(9-pin type)				(9-pin type)

16

59

Since the CS1G/H, CQM1H, and C200HX/HG/HE(-Z)E have a +5 V output, no external power supply is required for the NT-AL001.

5-1-4 Recommended Connectors, Cables, and Crimp Terminals

Connectors and Cables Recommended for RS-232C

When making an RS-232C connecting cable, as far as possible use the recom- mended parts indicated in the table below. Some units come supplied with one connector and connector hood.

Check the required parts and prepare them in advance.

Name	Model	Remarks	Delivered with
			CS1-series CS1G/H
		9-pin type	C-series CQM1, C200HS,
	XM2A-0901		C200HX/HG/HE(-Z)E
		Made by OMRON
			CVM1/CV-series CPUs
			CV500-LK201
Connector
		25-pin type	C500-LK203
	XM2A-2501		3G2A5-LK201-EV1
		Made by OMRON
			C200H-LK201-V1
	DB-25P	25-pin type	3G2A5-LK201-EV1
		Made by JAE	3G2A6-LK201-EV1

97