Omron NT31 NT31C manual Checking Communication with a Printer

System Maintenance Section 6-11

Checking Communication with a Printer

Check communication with a printer by following the menu operation from the System Menu shown below.

Ver 3.10 Select Maintenance Mode.

Select I/O Check.

Select I/F Check.

Select Printer.

Confirm that a printer is connected to the NT31/NT31C, then press Execute: Printer Interface Check will be printed out at the printer.

•While data is being sent to the printer, the message Checking Now... is dis- played.

•When the sending of data to the printer is completed, Finished Normal by Print- er Interface Check is displayed.

220