Omron NT31 NT31C Compatible Systems, Communications PC model Method, CQM1H-CPU21, CQM1H-CPU51

Device Monitor Function Section 6-13

6-13-1 Compatible Systems

The following table shows the combinations of communications methods and

PCs that can support the PT’s Device Monitor function.

Communications		PC model
method
1:1 NT Link	C200HS-CPU21-E	CPM1-10CDR-j*1
	C200HS-CPU23-E	CPM1-20CDR-j*1
	C200HS-CPU31-E	CPM1A-10CDj-j*1
	C200HS-CPU33-E	CPM1A-20CDj-j*1
	C200HE-CPU32 (-Z)E	CPM1A-30CDj-j*1
	C200HE-CPU42 (-Z)E	CPM1A-40CDj-j*1
	C200HG-CPU33 (-Z)E	CPM2A-30CDjj-j
	C200HG-CPU43 (-Z)E	CPM2A-40CDjj-j
	C200HG-CPU53 (-Z)E	CPM2A-60CDjj-j
	C200HG-CPU63 (-Z)E	CPM2C-10jjjjjj-j*2
	C200HX-CPU34 (-Z)E	CPM2C-20jjjjjj-j*2
	C200HX-CPU44 (-Z)E	CQM1-CPU4j-EV1
	C200HX-CPU54 (-Z)E	CQM1H-CPU21
	C200HX-CPU64 (-Z)E	CQM1H-CPU51
	C200HX-CPU65-ZE	CQM1H-CPU61
	C200HX-CPU85-ZE	SRM1-C02-V2
1:N NT Link	C200HE-CPU32 (-Z)E	CQM1H-CPU21
	C200HE-CPU42 (-Z)E	CQM1H-CPU51
	C200HG-CPU33 (-Z)E	CQM1H-CPU61
	C200HG-CPU43 (-Z)E	SRM1-C02-V2
	C200HG-CPU53 (-Z)E	CS1G-CPU42-E(V1)
	C200HG-CPU63 (-Z)E	CS1G-CPU43-E(V1)
	C200HX-CPU34 (-Z)E	CS1G-CPU44-E(V1)
	C200HX-CPU44 (-Z)E	CS1G-CPU45-E(V1)
	C200HX-CPU54 (-Z)E	CS1H-CPU63-E(V1)
	C200HX-CPU64 (-Z)E	CS1H-CPU64-E(V1)
	C200HX-CPU65-ZE	CS1H-CPU65-E(V1)
	C200HX-CPU85-ZE	CS1H-CPU66-E(V1)
		CS1H-CPU67-E(V1)

*1: A CPM1-CIF01 RS-232C Adapter is required.

*2: Use a Conversion Cable (CPM2C-CN111 or CS1W-CN114/118), CPM1-CIF01 RS-232C Adapter, or CPM1-CIF11 RS-422A Adapter to connect to the PC.

6-13-2 Connection Method

CQM1H or C200HX/HG/HE(-ZE)

CQM1 or C200HS

CPM1, CPM2A, or SRM1

CPM2C

The 1:1 NT Link or 1:N NT Link can be used. The connection method is exactly the same as for the 1:1 NT Link or 1:N NT Link. Refer to Section 4 Connecting to the Host from the RS-232C Port or Section 5 Connecting to the Host from the RS-422A/485 Port for details on connecting to the PC.

The 1:1 NT Link can be used. The connection method is exactly the same as for the 1:1 NT Link. Refer to Section 4 Connecting to the Host from the RS-232C Port or Section 5 Connecting to the Host from the RS-422A/485 Port for details on connecting to the PC.

The 1:1 NT Link can be used in all CPUs and the 1:N NT Link can also be used in -V2 and higher versions of the SRM1. The connection method is exactly the same as for the 1:1 NT Link or 1:N NT Link. With a CPM1, connect the RS-232C cable to the peripheral port via a CPM1-CIF01 RS-232C Adapter or CPM1-CIF11 RS-422A Adapter.

Refer to Section 4 Connecting to the Host from the RS-232C Port or Section 5 Connecting to the Host from the RS-422A/485 Port for details on connecting to the PC.

The 1:1 NT Link can be used. The connection method is the same as for the NT Link (1:1). Connect to the PC’s communications connector with a CPM2C-

228