Omron NT31 NT31C manual Memory Initialization

Memory Initialization Section 6-4

Clear the screen data by following the menu operation from the System Menu shown below.

Ver 3.10

Select Maintenance Mode.

Select Memory Init..

Select Screen Data.

Select Yes.

The screen data is cleared. During clear- ance, the message Erasing Now... is dis- played.

If No is selected, the NT31/NT31C returns to the MEMORY INIT. MENU screen without clearing the screen data.

On completion of screen data clearance, the NT31/NT31C returns to the MEMORY INIT. MENU screen.

After the screen data has been cleared, if an attempt is made to set the NT31/NT31C to the RUN mode before screen data has been transmitted from the Support Tool or memory unit, an error message will be displayed and the RUN mode will not be established.

141