Omron NT31 NT31C manual 196

System Maintenance Section 6-11

Display/set clock data by following the menu operation from the System Menu shown below.

Ver 3.10 Select Maintenance Mode.

Select Calendar Check.

Press Set.

If you are just checking the display, press Quit at this point; the NT31/NT31C will return to the MAINTENANCE MODE MENU screen.

Set the date.

Each of the digits of the year, month, date, hour, minute, and second settings, and the day of the week setting, are touch switches: press these touch switches to change the cor- responding settings.

Press Quit.

The clock data is set and the NT31/NT31C re- turns to the date and time display.

•Pressing Abort causes the NT31/NT31C to return to the date and time display without executing setting (with the previous settings still effective).

196