Omron NT31 NT31C manual Setting the Key Press Sound

System Settings Section 6-9

Set the system start-up wait time by following the menu operation from the Sys- tem Menu shown below.

Ver 3.10

Select Maintenance Mode.

Select Memory Switch.

Press Start-up Wait Time to display the re- quired time lapse.

The setting option changes each time the touch switch is pressed, according to the fol- lowing sequence.

01 02 03 .... 09 10 00 01 ....

To set other memory switches, select the relevant screen using the [] (next screen) or [] (previous screen) touch switch, then make the setting.

•To confirm the settings and quit the memory switch setting screen, press the Quit touch switch. The settings made last will be set and the NT31/NT31C will return to the MAINTENANCE MODE MENU screen.

•To quit the memory switch setting screen without confirming the settings, press the Abort touch switch. The NT31/NT31C will return to the MAINTENANCE MODE MENU screen with the previous settings still in effect.

6-9-3 Setting the Key Press Sound

It is possible to set whether or not the key sound is sounded when a touch switch on the NT31/NT31C screen is pressed.

•ON: When a touch switch is pressed, the key sound sounds for 0.2 seconds.

•OFF: The key sound does not sound when touch switches are pressed. The default (factory) setting is ON.

170