Whirlpool 900 Selecting cycle options, Changing a cycle setting, Changing an option setting

RESET

OPTIONS

HI-TEMP

WASH

AIR

DRY

SETTING THE CONTROLS

Selecting cycle options

If desired, press one or more Option pad(s). You can press an Option pad after the dishwasher starts as long as the cycle has not passed the point that the option is used. For example, you can press Air Dry any time before the Cycle Control knob reaches Dry.

Hi-Temp Wash

When Hi-Temp Wash is selected, the

dishwasher heats the water during the main wash of the Light, Normal, and Heavy cycles. Heating the water helps improve washing results. The Pots-N-Pans cycle

automatically uses Hi-Temp Wash.

NOTE: The Cycle Control knob does not move while water is being heated. Once the water reaches the proper temperature, the Cycle Control knob will begin moving again.

Air Dry

When Air Dry is selected, the air in the

dishwasher is not heated during the “dry” portion of a cycle. Using Air Dry helps save energy, but dishes take longer to dry and some spotting can occur. Some

items (such as plastics) may need towel drying. For best drying, use a liquid rinse agent.

NOTE: The dishwasher automatically heats the air in the dishwasher during the “dry” portion of the cycle unless you select Air Dry.

For 900 Model Series:

•Always select the Air Dry option when using the Rinse-Wash Later cycle.

For 911 and 915 Model Series:

•The Air Dry option is automatically selected for the Rinse-Wash Later cycle.

Changing a cycle setting

You can change a cycle setting anytime during any cycle.

1.Lift up the door latch to stop the cycle.

2.Turn the Cycle Control knob clockwise to the desired cycle.

3.If desired, press one or more Option pad(s).

4.Check the detergent dispensers. They must be filled properly for the new cycle.

NOTE: Turning the Cycle Control knob can cause the covered section of the detergent dispenser to open and release the detergent. Check the covered section if setting a cycle.

5.Close the door firmly until it latches. The dishwasher starts the new cycle.

Changing an option setting

You can change option settings anytime

during a cycle as long as the cycle has not passed the point that the option is used. For example, you can press Air Dry anytime before the Cycle

Control knob reaches Dry.

1.Press the Reset Options pad.

2.Press 1 or more Option pad(s).

17