SETTING THE CONTROLS

SETTING THE CONTROLS

 

 

A “ 3” shows what each cycle includes

CYCLE

 

 

MAIN

 

FINAL

 

TIME

CYCLE

 

WASH RINSE WASH RINSE RINSE DRY (Minutes)

 

 

 

 

 

 

 

LIGHT

 

 

 

 

 

 

LIGHT

Single wash for

 

 

 

 

 

pre-rinsed or lightly

 

 

 

 

 

soiled loads.

 

 

 

60

 

3

3

3

3

Select Hi-Temp Wash to heat water in the main wash.

The water heats to 140°F (60°C) in the final rinse.

RINSE-WASH LATER

RINSE - WASH LATER For rinsing a

USE AIR DRY

few items to be washed 1 or more days later.

Do not use detergent.

On 900 Model Series:

3

3

16††

The water heats to 140°F (60°C) in the final rinse.

Select the Air Dry option when using this cycle.

On 915 Model Series:

Air Dry is automatically selected.

Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown. The Cycle Control knob does not move while water is being heated.

††Cycle time may be longer on 900 Model Series depending on the temperature of water entering the dishwasher.

Canceling a cycle

You can cancel a cycle at any time.

1.Turn the Cycle Control knob slowly clockwise until you hear water draining. Let the dishwasher drain completely.

2.Open the door.

3.Turn the Cycle Control knob to Off.

16

Page 16
Image 16
Whirlpool 900 warranty Canceling a cycle, Setting The Controls