Omron NT31 NT31C manual Setting the Resume Function

System Settings Section 6-9

6-9-10 Setting the Resume Function

The NT31/NT31C has a function to keep the contents of the memory tables even when the power to the NT31/NT31C is OFF and write back them to the host when the power is turned ON.

If the resume function is OFF, the memory tables are initialized to these initial values on switching to the RUN mode. If the resume function is ON, these are not initialized and are kept the battery-backed up contents.

When the memory table is initialized, its contents are reset to the initial state that is set by the Support Tool.

When the system is started up the next time, the screen is displayed using the previous contents of the memory table.

• ON: The resume function is used.

•OFF: The resume function is not used. The default (factory) setting is OFF.

Reference: S When the voltage of the NT31/NT31C’s built-in battery becomes low, the memory table contents cannot be retained even if ON is set for the resume function.

SFor details on the resume record function, refer to 2-15-3 Resume Function in the Reference Manual.

181