Omron NT31 NT31C manual Connecting to CVM1/CV Series -EVj

Connecting to the RS-232C Port at the Host Section 4-1

Connecting to CVM1/CV Series (-EVj)

Set the DIP switches on the front panel as follows.

I/O port selection (selector switch)

Set this to RS-232C.

DIP switch setting (SW3)

6

5

4

3

2

1

ON OFF ON

Set SW3 to use NT link (ON, right side).

When using the CVM1/CV series, CPU execution processing (execution control 2) in the PC Setup must be set to Simultaneous processing.

71