Omron NT31 NT31C manual CQM1, CQM1H, C200HX/HG/HE-ZE, or SRM1, CPM1 or CPM2A, Adapter

Programming Console Function Section 6-12

6-12-2 Connection Method

CQM1, CQM1H, C200HX/HG/HE(-ZE), or SRM1

The connection method is exactly the same as for the NT Link (1:1). Refer to Section 4 Connecting to the Host from the RS-232C Port or Section 5 Connect- ing to the Host from the RS-422A/485 Port for details on connecting to the PC.

*When using the Programming Console function with a CQM1H, turn ON pin 7 of the DIP switch on the front of the CQM1H’s CPU Unit.

CPM1 or CPM2A	The connection method is the same as for the NT Link (1:1). With a CPM1, con-
	nect the RS-232C cable to the peripheral port via a CPM1-CIF01 RS-232C
	Adapter or CPM1-CIF11 RS-422A Adapter.
	Refer to Section 4 Connecting to the Host from the RS-232C Port or Section 5
	Connecting to the Host from the RS-422A/485 Port for details on connecting to
	the PC.
CPM2C	The connection method is the same as for the NT Link (1:1). Connect to the PC’s
	communications connector with a CPM2C-CN111 or CS1W-CN114/118 Con-
	necting Cable, a CPM1-CIF01 RS-232C Adapter, or a CPM1-CIF11 RS-422A
	Adapter.
	Refer to Section 4 Connecting to the Host from the RS-232C Port or Section 5
	Connecting to the Host from the RS-422A/485 Port for details on connecting to
	the PC.
	* When using the Programming Console function with a CPM2C, turn ON pin 2 of
	the DIP switch on the front of the CPM2C’s CPU Unit.
CS1G/CS1H	The connection method is exactly the same as for the NT Link (1:N) (standard or
	high-speed). Refer to Section 4 Connecting to the Host from the RS-232C Port
	or Section 5 Connecting to the Host from the RS-422A/485 Port for details on
	connecting to the PC. The standard or high-speed 1:N NT Link can be used.
	The Programming Console function can be used only when the PT’s unit num-
	ber is set to 0. Only one unit using the Programming Console function can be
	connected to each of the PC’s ports (built-in RS-232C port and peripheral port).
	With the CS1G/CS1H, the Programming Console function can be used simulta-
	neously at both the built-in RS-232C port and peripheral port. Furthermore, the
	Programming Console function can be started at the RS-232C port while a Pro-
	gramming Console is connected to the peripheral port.

223