Olympus Complete Guide to Setting Time and Date on DM-450 and DM-550 Microcassette Recorders

Setting time and date [Time & Date]

Notes

•If you press the OK button during the setup operation, the recorder will save the items that were set to that point.

•After setup, a message will sound saying that If the guidance is not required, select [Off], and the screen goes into [Voice Guide] ( P.68) setup. If you don’t want the guidance feature, select [Off].

2 Press the F2 or STOP4 button to close the menu screen.

Changing the time and date

While the recorder is during stop mode, press and hold the STOP 4 button to display the [Time & Date], and [Remain]. If the current time and date is not correct, set it using the procedure below.

STOP button

F2 button

+− button

9 0 button

OK button

1

Setting time and date

1Select [Time & Date] from the menu in [Device Menu].

•[Time & Date] will appear on the display.

•For details on menu settings, please refer to P. 44, P.45.

•The “hour” will flash on the display, indicating the start of the Time and Date setup process.

The following steps are the same as Step 1 through Step 3 of “Setting time and date [Time & Date]” ( P.20).

EN

21