Olympus DM-550, DM-450 manual Installing Software

Installing Software

Before you connect the recorder to your PC and use it, you must first install the "Olympus Sonority" software from the included Software CD.

Be sure to confirm the following before installation:

•Exit all running applications.

•You need to log on as an Administrator.

Windows

1Insert "Olympus Sonority" into the CD-ROM drive.

•The installation program will start automatically. Once the program starts, jump to step 4. If it does not, follow the procedures in steps 2 and 3.

6Confirm your acceptance of the terms of the Licensing Agreement.

•You must accept the terms of the Licensing Agreement to install "Olympus Sonority". After checking the [Agree] box, click [Next].

5

Installing Software

2Opening contents in the CD-ROM with [Explorer].

3Double-click [Setup] in the CD- ROM.

4When the "Olympus Sonority" launch screen is displayed, click the desired language to select it.

5When [Olympus Sonority Setup] is clicked, the Installer Opening screen will start up. Follow the Installer Wizard instructions.

7[Registration of User Registration Information]

•Please enter your name, company name and serial number which is listed on the separate sheet. Click [Next] after entering.

8[Select Setup Type]

•The installation destination can be changed. Click [Next] if you do not want to change (Select [Custom] if you want to change).

9[Start Installation]

•Click [Install] to start installing. Do not carry out other operations before the installation is completed and the [Complete] screen is displayed.

10[Installation Complete]

•When the installation is completed, the completed [Install Shield] screen will be displayed.

•To connect the recorder to a PC, refer to "Connecting to your PC" ( P.80), to start up the Olympus Sonority, refer to "Running Olympus Sonority" ( P. 82).

EN

76