Olympus DM-450 Erasing, Play the file you want to partial erase, Press the Erase button again

Erasing

Partially erase a file (For DM-550)

Only a PCM file recorded in the recorder can be partially erased.

1Play the file you want to partial erase.

•Forward a file to the position that shall be erased. If the file is long, use the 9 button to move to the position you want to delete.

2At the starting position of the partial erase, press the ERASE button.

• [Erase start] will flash on the display.

3Press the ERASE button again.

•[Start point] and [End point] on the display flash alternatively. When the lights are flashing, playback continues and you can rewind or fast- forward as usual and fast-forward to the end of erase. If the file reaches the end during the flashing of the lights, that will be the position where erase ends.

4At the position you want to end partial erase, press the ERASE button again.

•The display will switch to [Partial erasing !] and start the partial erase. The deletion is completed when [Partial erase completed.] is displayed.

•Playback will stop at the end location of the partial erase.

3

Erasing

Notes

•Partial erase is not applicable to "les recorded in the WMA or MP3 formats.

•The File Created Date will not change even if the "le is partially erased.

EN

43