Olympus DM-550, DM-450 manual Setting time and date Time & Date, Press the + or − button to set

EN

20

Setting time and date

Setting time and date [Time & Date]

If you set the time and date beforehand, the information when the file is recorded is automatically stored for each file. Setting the time and date beforehand enables easier file management.

When you use this recorder for the

1 first time after purchasing, or when you switch it on after removing the batteries for more than 15 minutes when exchanging batteries, etc, the [Set Time & Date] will appear. When the “hour” is flashing, conduct the setup from Step 1.

F1 button

+− button

9 0 button

OK button

1Press the 9 or 0 button to select the item to set.

•Select the item from the “hour”,

“minute”, “year”, “month” and “day” with a flashing point.

2Press the + or − button to set.

•Follow the same steps by pressing the 9 or 0 button to select the next item, and press the + or − button to set.

•You can select between 12 and 24 hour display by pressing the F1 button while setting the hour and minute.

Example: 10:20 P.M

10:20 PM22:20 (Initial setting)

•You can select the order of the “month”, “day” and “year” by pressing the F1 button while setting them.

Example: April 15, 2009

4M 15D 2009Y

(Initial setting)

15D 4M 2009Y

2009Y 4M 15D

3Press the OK button to complete the setting.

•The clock will start from the set date and time. Press the OK button according to the time signal.