Olympus DM-450 Slide the POWER/HOLD switch to the Hold position, Set the recorder to Hold mode

HOLD

If you bring the POWER/HOLD switch to the HOLD position, the current conditions will be preserved, and all buttons and switches will be disabled.This feature is useful when the recorder has to be carried in a bag

or pocket. Also, you can stop to prevent accident during recording.

Set the recorder to HOLD mode

Slide the POWER/HOLD switch to the HOLD position.

Notes

•If you press any button in HOLD mode, the clock display %ashes for 2 seconds, but it will not operate the recorder.

•If HOLD is applied during playback (recording), operation is disabled with the playback (recording) state unchanged (When playback has ended and the recording has ended due to the remaining memory being used up, it will stop).

•This recorder can be e&ectively operated via the connected exclusive remote control set RS30W (optional), even when it is in HOLD mode.

1

HOLD

•After [Hold] appears on the display, the recorder is set to HOLD mode.

Exit HOLD mode

Slide the POWER/HOLD switch to the

Aposition.

A

EN

19