Inserting and Ejecting a microSD card

1

Inserting and Ejecting a microSD card

The "microSD" indicated in the instruction manual refers to both microSD and microSDHC.

This recorder can be used with commercially available microSD cards as well as the built- in memory.

Inserting a microSD card

1While the recorder is during stop mode, open the card cover.

2Face the microSD card the correct way and insert it into the card slot as shown in the diagram.

3Close the card cover securely.

When you insert the microSD card, the recording media changeover display will appear.

4When you are recording to a microSD card, press the + or − button and select [Yes].

5Press the OK button to complete the setting.

EN

22

Insert the microSD card keeping it straight.

The microSD card stops with a click when it is inserted all the way.

Inserting the microSD card the wrong way or at an angle could damage the contact area or cause the microSD card to jam.

If the microSD card is not inserted all the way, data may not be written to the microSD card.

Notes

It is possible to switch the recording media over to the built-in memory ( P.54).

In some cases microSD card which have been formatted (initialized) by another device, such as a computer, cannot be recognized. Be sure to format them with this recorder before using ( P.71).

Page 22
Image 22
Olympus DM-550, DM-450 manual Inserting and Ejecting a microSD card, Inserting a microSD card, Close the card cover securely