Olympus DM-450 Recorder skips to the beginning of the previous file, Playback through earphone

Playback

While the recorder is during playback mode, press the 0 button twice.

•The recorder skips to the beginning of the previous file.

Notes

•When you skip to the beginning of the file during playback, the recorder will stop at the position of the index mark and temp mark. The index mark and temp mark will be skipped when you perform the operation in stop mode ( P. 38).

•When [Skip Space] set to other than

[File Skip], the recorder will skip forward/ reverse the specified time, then will start playback ( P. 52).

Playback through earphone

An earphone can be connected to the EAR jack of the recorder for listening.

To EAR

jack

•When the earphone is used, the recorder speaker will be switched-off.

Notes

•To avoid irritation to the ear, insert the earphone after turning down the volume level.

•When you listen with the earphone during playback, do not raise the volume too much. It may cause hearing impairment and decrease in hearing ability.

Settings relating to playback

[Segment	This function enables
repeat]	repeated playback of part of
( P.40)	the file being played.
	This changes the order of the
[Replace]	files in the selected folder. It
	is useful for playing back files
( P.56)
	in a preferred order while in
	normal playback mode etc.
	If recorded audio is difficult
[Noise Cancel]	to understand because of
	noisy surroundings, adjust
( P.50)
	the Noise Cancel setting
	level.
	Level adjustments of
[EUPHONY]	the [EUPHONY] setting can
( P.50)	be set to four stages accord-
	ing to preference.
	The recorder has a Voice
	Filter Function to cut low
[Voice Filter]	and high frequency tones
( P.50)	during normal, fast, or slow
	playback, and enable clear
	audio playback.
[Play Mode]	You can select the playback
	mode that fits your prefer-
( P.50)
	ence.
[Play Speed]	The playback speed can be
	set to slow speed or fast
( P.51)
	speed playback.
[Skip Space]	The skip interval length can
( P.52)	be set.
[Alarm]	The alarm playback function
	can be set to play a selected
( P.52)
	file at a pre-set time.
	Playback settings of your
[Play Scene]	choice can be saved to suit
( P.52)	different sound qualities and
	playback methods.
[Intro Play]	You can listen to the first few
	seconds of a file by touching
(For DM-550)
	the cursor to a file within a
( P.53)
	folder.

3

Playback

EN

35