Olympus DM-550, DM-450 manual Power supply, Inserting batteries, Battery indicator

Power supply

Inserting batteries

This recorder can be used with either Ni-MH Rechargeable Batteries or AAA Alkaline Batteries.

1 Slide the battery cover open while lightly pressing the battery

1	cover release button.
Power supply

2Insert battery, observing the correct = and - polarities.

3Close the battery cover

completely by pressing to the direction A, then sliding to the direction B.

4Slide the POWER/HOLD switch in the direction indicated by the arrow, and turn the power on.

•If the “hour” indicator flashes in the display, see “Setting time and date [Time & Date]” ( P.20).

EN

14

•When charging the recorder, be sure to use the supplied specified Ni-MH rechargeable (BR401) batteries.

•The supplied rechargeable batteries are not fully charged. Before using the unit the first time or after long periods of disuse, it is recommended that you charge them until full ( P.15, P.16).

Battery indicator

The battery indicator on the display changes as the batteries lose power.

•When [] appears on the display, replace the batteries as soon as possible. When

the batteries are too weak, [] and

[Battery Low] appears on the display, the recorder shuts down.