Olympus DM-450, DM-550 Completing the setting, Time setting, Rec Mode setting, Folder setting

Menu setting method

[Time] setting:

1 Press the 9 or 0 button to select "Hour"and "Minute" in the [Start Time] and "Hour" and "Minute" in the [Stop Time].

2 Press the + or – button to set.

3 Press the OK button to exit [Time] selection.

[Rec Mode] setting:

Regardless of the regular [Rec Mode] ( P.47), timer recording will start in a set recording mode.

1 Press the + or – button to select a recording mode.

2 Press the OK or 9 button.

3 Press the + or – button to select a recording rate.

4 Press the OK button to exit Recording mode selection.

[Folder] setting:

1 Press the + or – button to select the destination to save to (Memory) (For DM-550)

2 Press the OK or 9 button to move to the [Folder] setting.

3 Press the + or – button to select the destination to save to (Folder).

4 Press the OK button to exit [Folder] setting selection.

[Mic Sense] setting:

Regardless of the recorder’s microphone sensitivity setting (P.47), timer recording will start at a set microphone sensitivity.

1 Press the + or – button to select from [High], [Middle], and [Low].

2 Press the OK button to exit [Mic Sense] selection.

6Completing the setting.

1 Pressing + or − button to select

[Finish].

2 Press the OK button to complete the setup screen.

Programmed settings will be applied and the screen will return to the preset number selection menu. If the [On/Off]

setting is set to [On], will appear on the display.

a When setting to [On]

a

When setting other preset numbers, repeat Steps 2 through 6.

When the 9 button is pressed in the Select in Advance Menu, the settings selected can be confirmed.

7Press the F2 or STOP 4 button to complete the setting.

• The will appear on the display.

Notes

•If the recorder is in use at the preset start time, the timer recording will start directly after stopping the recorder.

•Even if the power if turned o& or the recorder is put on Hold, timer recording will start at a speci"ed time.

•If three timer recordings have the same starting times, [Preset 1] has the highest priority and [Preset 3] has the lowest.

•If the starting time for timer recording and alarm playback ( P.64) is set for the same time, timer recording will have priority.

•If the batteries run out while recording based on the timer setting, the recorder will stop recording. Check the battery power before starting the timer recording.

4

Menu setting method

EN

61