Setup menus

SYSTEM

 

Item

 

Setting

 

 

 

 

 

Description of settings

No.

Superimposed

No.

Superimposed

 

display

display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

SYSTEM FREQ

 

 

For selecting the system frequency

 

 

0000

59/60

0: The 59.94 Hz or 60 Hz system frequency is selected.

 

 

0001

50i/25P

1: The 50 Hz or 25 PsF system frequency is selected.

 

 

20002

 

At this setting, the 1080/25 PsF format signals can be recorded and played back

 

 

 

 

in the same way as with the 1080/50i format.

 

 

 

223/24

2: The 23.98 Hz or 24 Hz system frequency is selected.

 

 

20003

225 (HD)

3: The 25 Hz system frequency is selected. However, black signals are output

 

 

 

 

from the SD SDI output and analog composite connectors.

 

 

20004

225 (SD)

4: The 25 Hz system frequency is selected. However, black signals are output

 

 

 

 

from the HD SDI output and analog component connectors.

 

 

 

 

<Note>

 

 

 

 

Merely changing this item’s setting only causes the menu item to flash, and the

 

 

 

 

setting itself is not reflected in the unit. To reflect a new setting in the unit, turn off

 

 

 

 

the power and then turn it back on.

 

 

 

 

 

26

HD SYS H ADV

 

 

For selecting the output whose HD output phase is to be advanced by 90H in

 

 

 

 

relation to the SD output.

 

 

0000

0H

0: Both the HD and SD signals are output in phase with the HD and SD REF

 

 

 

 

output signals.

 

 

0001

90H

1: The HD signals are output at a phase advanced by 90H from the SD output

 

 

 

 

signals.

 

 

 

 

When the SD REF signal is input, the REF input and SD output are in-phase,

 

 

 

 

and when the HD REF signal is input, the REF input and HD output are in-

 

 

 

 

phase.

 

 

 

 

<Notes>

 

 

 

 

O The audio signals and TC signal are output in phase with the HD output.

 

 

 

 

O With the 720p format, there is a phase difference of 120H between them.

 

 

 

 

O This item’s setting is fixed to “0H” when “1394” is selected as the menu item

 

 

 

 

No.600 [VIDEO IN SEL] setting or when an SD format tape is being played

 

 

 

 

back.

 

 

 

 

 

2 This appears when the AJ-YA120AG (optional accessory) has been installed.

” indicates the factory setting.

32

Page 32
Image 32
Panasonic AJ-YA120AG manual Setting Description of settings, System Freq, Hd Sys H Adv