Setup menus
AUDIO
| Item |
| Setting |
| |
|
|
|
| Description of settings | |
No. | Superimposed | No. | Superimposed | ||
| |||||
display | display |
| |||
|
|
| |||
|
|
|
|
| |
|
|
|
|
| |
770 | MONITOR MIX |
|
| For setting the audio monitor output sound. | |
|
|
|
| (This functions when the audio monitor selector switch on the front panel is at the | |
|
|
|
| ST position.) | |
|
| 0000 | STEREO | 0: The sound is output in stereo. | |
|
| 0001 | CH1+2 | 1: Mixed sound is output (to both the left and right connectors). | |
|
|
|
|
| |
771 | H.PHONE MIX |
|
| For setting the headphone output sound. | |
|
|
|
| (This functions when the audio monitor selector switch on the front panel is at the | |
|
|
|
| ST position.) | |
|
| 0000 | STEREO | 0: The sound is output in stereo. | |
|
| 0001 | CH1+2 | 1: Mixed sound is output (when a monaural earphone is used). | |
|
|
|
|
| |
780 | AUD OUT SEL |
|
| For setting the sound to be output from the analog audio output connectors. | |
|
| 0000 | LINE | 0: All the output connectors are used as the main line output. | |
|
|
|
| CH1 connector = CH1 sound | |
|
|
|
| CH2 connector = CH2 sound | |
|
|
|
| CH3 connector = CH3 sound | |
|
|
|
| CH4 connector = CH4 sound | |
|
| 0001 | CH1/2 | 1: The CH1 and CH2 output connectors are used as the main line output, and the | |
|
|
|
| CH3 and CH4 output connectors are used as the monitor output connectors. | |
|
|
|
| CH1 connector = CH1 sound | |
|
|
|
| CH2 connector = CH2 sound | |
|
|
|
| CH3 connector = Monitor L (CH1, CH2, CH1+CH2) sound | |
|
|
|
| CH4 connector = Monitor R (CH1, CH2, CH1+CH2) sound | |
|
| 0002 | CH3/4 | 2: The CH1 and CH2 output connectors are used as the main line output, and the | |
|
|
|
| CH3 and CH4 output connectors are used as the monitor output connectors. | |
|
|
|
| CH1 connector = CH3 sound | |
|
|
|
| CH2 connector = CH4 sound | |
|
|
|
| CH3 connector = Monitor L (CH3, CH4, CH3+CH4) sound | |
|
|
|
| CH4 connector = Monitor R (CH3, CH4, CH3+CH4) sound | |
|
|
|
|
| |
781 | IN IMP SEL |
|
| For setting the analog audio input impedance. | |
|
| 0000 | 600 | 0: 600 Ω | |
|
| 0001 | HIGH | 1: High impedance | |
|
|
|
| <Note> | |
|
|
|
| Regardless of this setting, the impedance is set to 3 kΩ when | |
|
|
|
| as the menu item No.701 to 704 | |
|
|
|
|
|
MENU
| Item |
| Setting |
| |
|
|
|
| Description of settings | |
No. | Superimposed | No. | Superimposed | ||
| |||||
display | display |
| |||
|
|
| |||
|
|
|
|
| |
|
|
|
|
| |
A02 | P.ON LOAD |
|
| For setting whether to change the setup menu settings to the user initial settings | |
|
|
|
| when the power is turned on. | |
|
| 0000 | OFF | 0: The settings are not changed. | |
|
| 0001 | ON | 1: The settings are changed. | |
|
|
|
|
|
“” indicates the factory setting.
47
