Mitsubishi 11A-1-1, 6G7 ENGINE E - W - Specifications, Service Specifications, Timing belt

6G7 ENGINE (E - W) - Specifications			11A-1-1
1. SPECIFICATIONS
SERVICE SPECIFICATIONS
Items		Standard	Limit
Timing belt
Auto-tensioner rod length mm		3.8 - 5.0	-
Auto-tensioner rod projection length mm		12	-
Auto-tensioner rod pushed-in amount (when pushed with a force of 98		1.0 or less	-
- 196 N) mm
Rocker arms and camshaft
Camshaft cam height mm (Identification	Intake	37.71	37.21
mark: 1)
	Exhaust	37.14	36.64
Camshaft journal outside diameter mm		45	-
Lash adjuster leak down time		4 - 20/1.0	-
[diesel fuel at 15 - 20_C] seconds/mm
Cylinder head and valves
Cylinder head flatness of gasket surface mm		Less than 0.03	0.2
Cylinder head grinding limit of gasket surface mm		-	0.2
(Total resurfacing depth of both cylinder head and cylinder block)
Cylinder head overall height mm		120	-
Valve thickness of valve head (margin) mm	Intake	1.0	0.5
	Exhaust	1.2	0.7
Valve overall height mm	Intake	112.30	111.80
	Exhaust	114.11	113.61
Valve stem outside diameter mm	Intake	6.0	-
	Exhaust	6.0	-
Valve thickness to valve guide clearance mm	Intake	0.02 - 0.04	0.10
	Exhaust	0.04 - 0.06	0.15
Valve face angle mm		45_ - 45.5_	-
Valve spring free length mm		51.0	50.0
Valve spring load/installed height N/mm		267/44.2	-
Valve spring out-of-squareness		2_ or less	Maximum 4_
Valve seat valve contact width mm		0.9 - 1.3	-
Valve guide inside diameter mm		6.0	-
Valve guide projection from cylinder head upper surface mm		14	-
Valve stem projection mm		49.3	49.8
Oil pan and oil pump
Oil pump tip clearance mm		0.06 - 0.18	-

E Mitsubishi Motors Corporation Dec. 1996 PWEE9615