Panasonic AJ-YA120AG manual Operation

Setup menus

OPERATION

	Item		Setting
						Description of settings
No.	Superimposed	No.	Superimposed
	display		display
101	SHTL MAX			For setting the maximum speed in the shuttle mode when using the external
				controller connected to the 9-pin remote connector.
		0000	X8.4	0:	8.4k normal speed
		0001	X16	1:	16k normal speed
		0002	X32	2:	32k normal speed
				<Note>
				The maximum speed for the HD SP mode is automatically limited to 25k normal
				speed.
102	FF.REW MAX			For setting the maximum speed of fast forward or rewind operations.
		0000	X16	0:	16k normal speed
		0001	X32	1:	32k normal speed
		0002	X50	2:	50k normal speed
				<Notes>
				O The maximum speed for the DV and DVCAM modes is automatically limited to
					32k normal speed.
				O The maximum speed for the HD SP mode is automatically limited to 25k normal
					speed.
104	REF ALARM			For setting whether a warning is to be displayed when the REF VIDEO signal is not
				connected.
		0000	OFF	0: No warning is displayed.
		0001	ON	1: A warning is displayed by the flashing STOP lamp.
106	EJECT EE SEL			For setting the video and audio output statuses during eject.
		0000	EE	0: Both		the video and audio signals are always output in the E-E (electric
					modulation to electric playback) mode regardless of the position of the TAPE/EE
					switch.
		0001	BLACK	1: The output status differs according to the position of the TAPE/EE switch.
					EE:	The signals are output in the E-E mode.
					TAPE: BLACK is output for the video, and the audio is muted.
		0002	GRAY	2: The output status differs according to the position of the TAPE/EE switch.
					EE:	The signals are output in the E-E mode.
					TAPE: GRAY is output for the video, and the audio is muted.
				<Note>
				The EE pictures will be all black when the AJ-YA120AG (optional accessory) or AJ-
				YAD120AG (optional accessory) is not installed.
107	EE MODE SEL			For selecting the output signals in the EE mode.
		0000	NORMAL	0: Signals delayed by the time taken by internal signal processing are output.
		0001	THRU	1: Signal processing is not undertaken internally, and the signals are output
					without delay at their original timing.
				<Note>
				The superimposed information is not displayed when THRU is used as the setting.
108	PLAY DELAY	0000	0	For setting the play rise time in frame increments.
		:	:
		0015	15
109	CAP LOCK			For selecting in how many field increments the playback framing is to be locked.
		0000	2F	0: 2F
		0001	4F	1: 4F
		0002	8F	2: 8F
				<Notes>
				O 8F can be selected only when 50 is selected as the menu item No.25 [SYSTEM
					FREQ] setting.
				O In the HD LP or HD SP mode, the 2F mode is selected during recording2,
					including follow-on recording, and playback regardless of the menu item’s
					setting.

2 This appears when the AJ-YA120AG (optional accessory) or AJ-YAD120AG (optional accessory) has been installed.

“” indicates the factory setting.

37