Setup menus
TIME CODE
| Item |
| Setting |
|
|
|
|
|
|
| Description of settings |
No. | Superimposed | No. | Superimposed |
| |
|
| ||||
display | display |
|
| ||
|
|
|
| ||
|
|
|
|
| |
|
|
|
|
| |
508 | BINARY GP |
|
| For setting the usage status for the user’s bit of the time code generated by the | |
|
|
|
| TCG. | |
|
| 0000 | 000 | 0: No character set specified | |
|
| 0001 | 001 | 1: | |
|
| 0002 | 010 | 2: Undefined | |
|
| 0003 | 011 | 3: Undefined | |
|
| 0004 | 100 | 4: Undefined | |
|
| 0005 | 101 | 5: Page/line | |
|
| 0006 | 110 | 6: Undefined | |
|
| 0007 | 111 | 7: Undefined | |
|
|
|
|
| |
509 | PHASE CORR |
|
| For setting whether to control the phase correction of the LTC output during | |
|
|
|
| playback. | |
|
| 0000 | OFF | 0: The phase correction is not controlled. | |
|
| 0001 | ON | 1: The phase correction is controlled. | |
|
|
|
|
| |
510 | TCG CF FLAG |
|
| For selecting whether to set the CF flag of the TCG to ON. | |
|
| 0000 | OFF | 0: The CF flag is set to OFF. | |
|
| 0001 | ON | 1: The CF flag is set to ON. | |
|
|
|
|
| |
511 | DF MODE |
|
| For selecting whether to use the DF or NDF mode for CTL and TCG. | |
|
| 0000 | DF | 0: The drop frame (DF) mode is used. | |
|
| 0001 | NDF | 1: The | |
|
|
|
|
| |
512 | TC OUT REF |
|
| For setting the signal to be used as the reference for aligning the phase of the time | |
|
|
|
| code which is output from the TC OUT connector with the phase of the external TC | |
|
|
|
| input signal when a setting other than INT is selected as the menu item No.507 [TC | |
|
|
|
| SOURCE] setting. (In EE mode only) | |
|
| 0000 | VOUT | 0: The output video signal is used as the reference. | |
|
| 0001 | TC_IN | 1: The external time code input signal is used as the reference. | |
|
|
|
|
| |
513 | VITC OUT |
|
| For selecting how to output the VITC signal which is superimposed onto the output | |
|
|
|
| video signal. | |
|
| 0000 | SBC | 0: In the playback mode, the time code recorded in the SBC area is output. | |
|
| 0001 | VAUX | 1: In the playback mode, the time code recorded in the VAUX area is output. | |
|
|
|
| <Note> | |
|
|
|
| O The VITC information which is detected by the HD serial input is automatically | |
|
|
|
|
| recorded in the VAUX area when the images are recorded. |
|
|
|
| O When “23/24,” “25(HD)” or “25(SD)” is selected as the menu item No.25 | |
|
|
|
|
| [SYSTEM FREQ] setting and VAUX is selected as the VITC OUT setting, the |
|
|
|
|
| time code which is output may not be continuous. |
|
|
|
|
| |
514 | HD EMBD VITC |
|
| For selecting whether to superimpose the VITC information onto the HD serial | |
|
|
|
| output. | |
|
| 0000 | OFF | 0: The VITC information is not superimposed. | |
|
| 0001 | ON | 1: The VITC information is superimposed. | |
|
|
|
|
| |
515 | HD EMBD LTC |
|
| For selecting whether to superimpose the LTC information onto the HD serial | |
|
|
|
| output. | |
|
| 0000 | OFF | 0: The LTC information is not superimposed. | |
|
| 0001 | ON | 1: The LTC information is superimposed. | |
|
|
|
|
| |
530 | TC PRESET |
|
| For setting the time code of the internal TCG. | |
|
|
|
| 00000000 to 23595924 | |
|
|
|
| Selection range of 00000000 to 23595929 when 59/60 is selected as the menu | |
|
|
|
| item No.35 [SYSTEM FREQ] setting | |
|
|
|
|
| |
531 | UB PRESET |
|
| For setting the user’s bit of the internal TCG. | |
|
|
|
| 00000000 to FFFFFFFF | |
|
|
|
|
|
|
“” indicates the factory setting.
42
